Energy Central Professional

 

Research from University of Sao Paulo (USP) in the Area of Wind Turbines Described (Geometric Analysis of Small Wind Turbine Blades Manufactured by Additive Manufacturing)


Energy Daily News  

 

    2022 MAY 12 (NewsRx) -- By a News Reporter-Staff News Editor at Energy Daily News -- Investigators discuss new findings in wind turbines. According to news originating from the University of Sao Paulo (USP) by NewsRx editors, the research stated, “One of the many benefits of additive manufacturing (AM) is to produce parts ready to assemble and use, a concept called direct digital manufacturing (DDM). This, besides the ease of manufacturing complexes geometries, creates a potential for applying the AM technology for producing small wind turbines (SWT) blades.”

    Our news journalists obtained a quote from the research from University of Sao Paulo (USP): “Small wind turbines have an increasing role in the worldwide energy matrix, which can be built up by developing site-optimized and customized turbines. Customizing SWT can increase the energy harvesting potential of such machines; however, it requires flexible manufacturing procedures. The blade’s geometric complexity and flexible manufacturing are features that can benefit from the potentials of AM. This work analyses the final geometry of SWT blades manufactured by AM, assessing the scope of DDM in the SWT field. The parts length is 225 mm, the blades were manufactured by the Fused Deposition Modeling (FDM) method using a Dimension Elite machine produced by Stratasys. The geometric evaluation was performed using a CROMA coordinate measuring machine.”

    According to the news reporters, the research concluded: “The measurements showed good results when compared to values adopted in several studies that investigated the effects of geometric disturbances on wind turbine blades. This work affirms that AM is a powerful technology for manufacturing SWT blades in a DDM scope.”

    For more information on this research see: Geometric Analysis of Small Wind Turbine Blades Manufactured by Additive Manufacturing. Journal of Aerospace Technology and Management, 2022,14(1):e1022-e1022. (Journal of Aerospace Technology and Management - http://www.jatm.com.br). The publisher for Journal of Aerospace Technology and Management is Departamento de Ciencia e Tecnologia Aeroespacial.

    A free version of this journal article is available at https://doi.org/https://doi.org/10.1590/jatm.v14.1252.

    Our news editors report that additional information may be obtained by contacting Heitor Andrade Porto, University of Sao Paulo (USP) - Escola de Engenharia de Sao Carlos - Sao Carlos (SP) - Brazil.

    (Our reports deliver fact-based news of research and discoveries from around the world.)

TOP


Copyright © 1996-2022 by CyberTech, Inc. All rights reserved.
Energy Central® and Energy Central Professional® are registered trademarks of CyberTech, Incorporated. Data and information is provided for informational purposes only, and is not intended for trading purposes. CyberTech does not warrant that the information or services of Energy Central will meet any specific requirements; nor will it be error free or uninterrupted; nor shall CyberTech be liable for any indirect, incidental or consequential damages (including lost data, information or profits) sustained or incurred in connection with the use of, operation of, or inability to use Energy Central. Other terms of use may apply. Membership information is confidential and subject to our privacy agreement.